Single 240 V AC relay module

MI-D240CMOE

The M201EA–240 is a loop-powered device controlling an unsupervised double pole (one normally open, one normally closed) output suitable for managing 240VAC loads. The output relay is a bistable device, latching in the On or Off state on command from the control panel. The module is supplied in new shiny white enclosure common to the whole I/O modules family. This enclosure is equipped with integrated DIN rail brackets, designed to mount directly on to a standard 35mm ‘Top Hat’ DIN rail.

• Integrated DIN rail brackets
• Switching output module• Tri-colour light pipes
• Built-in short circuit isolators
• Addressability through rotary switches
• Laser engraved label data
• High power loop 48V ready
• Low standby current
• Common mechanical platform for modules’ enclosure
• Improved light pipe visibility on two sides
• IP30 rated

Operating voltage 15 ... 32 V DC
LED Cutoff Voltage
16.5 VDC
Maximum Standby Current
75μA at 24VDC (no communications)
Maximum Alarm Current
5.5mA at 24VDC, one communication each 5 seconds with LED blink enabled
Coil Activation/Deactivation Current
76mA max for 12mS
Relay Specifications
5A at 30VDC, 5A at 250VAC, resistive load
Operation Temperature
-20°C to 60°C
Humidity
5% to 95% Relative Humidity (non-condensing)
IP Rating
IP30 (IP44 in M200E-SMB)
Dimensions (HxLxW)
22mm x 93mm (including terminal blocks) x 99mm (including DIN brackets)
Weight
118g
Maximum Wire Gauge for Terminals
2.5mm2